Making A Base

Airbnb yurt, nursery yurt, glamping yurt, Authentic Mongolian Yurt, Traditional Mongolian Yurt, Mongolian Yurt, Traditional Mongolian Yurt to buy, Yurt Fabric, Yurt Base, Glamping Yurt, Yurt Care, yurt sellers

Generally, customers are asked to prepare a base for their yurts and we supply some recommendations to them. Occasionally, we do the base for them at an additional fee.

There is a wide range of ways (choosing design or material-wise) to make a base for your yurt and we recommend reading relevant information from google search engines.

Decking floor & platforms are suitable for permanent use. Having a solid wooden floor under the foot is getting popular now.

Before you make the base, please consider the following:

  • The ground should be level (use wooden posts, pre-cast concrete deck blocks)

  • The shape of the base should be circular and the same size as the yurt's diameter.

  • The height of the base should be at least 7'' (20cm) so, the skirt of all fabrics can come down to cover the base. This way, the yurt will be protected from draught, water and helps to hold up the insulation.

  • The ground should be dry (well-drained), so, remove a few inches of topsoil and put down a weed-suppressing barrier, add some gravel or hardcore which will make the base level and stays the same position (will not move down)

The following method has been popular within our customers. For 6.20m diameter yurt.

  • Beam Layout Plan 

  • Solid dense block - 400 x 215 x 100 mm x around 40 - 50 pieces.

  • We position all three layers (11 mm and 18 mm OSB & 50 mm Insulation) as a landscape shape & put a block at every corner of the board.

  •  

  • Screws – SDS screws 7.5 mm x 152 mm x (40 - 50 pieces)

  • 5.5 x 100 mm x 200

  • 5.5 x 80 mm x 600

  • 5.5 x 60 mm x 400

  • 5.5 x 35 x 200  

 

The Base Frame

Frame - Treated Timber - 45 x 70 x 3000 x 30 pieces & Timber Post - 75 x 75 x 2.4 x 8 pieces

The Base Boards 

1. OSB / Plywood - 2400 x 1200 x 11 mm x 12 pieces & We place the OSB / Plywood boards as a landscape mode from the door

side.

2. Insulation / Kingspan - 2400 x 1200 x 50 mm x 12 pieces

 

Place the insulation boards over the OSB (11 mm)

3. OSB / Plywood - 2400 x 1200 x 18 mm x 12 pieces

 

The third layer is OSB (18 mm), put the boards over the insulation boards.

yurt nursery, yurt Airbnb, glamping yurt, a Mongolian yurt, Authentic yurts